-
Download and Configure Center
-
You can view your connection information here.
At the same time, here to provide you with an automated configuration file generation, including all the Shadowsocks server information, allowing you to quickly add a lot of servers, fast switching.
+
Download and Configurations Center
+
You can view your Shadowsocks connection details here.
You will also find the setup instructions for all common OS, as well as the downloadable app files.
-
download,Unzip, run the program, and then you have three ways to import all nodes
- (1)DownloadThis (ordinary port)orThis (single-port multi-user),Right-click the small aircraft server - from the configuration file into the server, select this file,
- (2)Click onThis (ordinary port)orThis (single-port multi-user), Then right-click the airplane - copy the address from the clipboard
- (3)(Recommended) Right-click Aircraft-Server-SSR Server Subscription Settings, set the subscription address to the following address, leave the other parameters blank, and then update the SSR server subscription.
- And then select a suitable server, proxy rules selected "bypass the LAN and the mainland", and then you can access.
+
Download,then unzip the file. Next, run the program. You now have three ways to import all servers.
+ (1)Download This (ordinary port) or This (single-port multi-user), then right-click on the small paper airplane icon on the bottom right corner of your screen. Select "import from configuration file" and select this file,
+ (2)Click on This (ordinary port) or This (single-port multi-user). Then right-click the paper airplane icon. Select "import from clipboard"
+ (3)(Recommended) Right-click the paper airplane icon. Go to server -> SSR Server Subscription Settings. Set the subscription address to the following address, leave the other parameters blank, and then refresh the SSR server subscription.
+ Once you have entered all the servers, select a suitable server, set proxy rules to "bypass LAN and mainland", and you will be connected.
SSR Subscription address:
Ordinary port address:{$baseUrl}/link/{$ssr_sub_token}?mu=0
@@ -118,24 +118,24 @@
-
Download, Install, and then downloadThis (ordinary port)orThis (single-port multi-user), Run the program, the small aircraft on the right server list submenu "import server configuration file ..." import this file, and then select a suitable server, update the PAC, and then open the system agent to the Internet.
+
Download, install, and then download This (ordinary port) or This (single-port multi-user). Then run the program, find the small paper airplane icon on the top right of the screen, open the server list submenu and find the button that says "import server configuration file ...". Click on it and import this file, and then select a suitable server, update the PAC, and then use your favorite browser to surf the net.
-
Recommended downloadShadowrocket, Has purchased this software for the US store Apple ID:shz7348@icloud.com passwordQq654321.Pay attention to special symbols and case, switch the store account to download and install, and then click in SafariThis (ordinary port)orThis (single-port multi-user), And then click OK, you can add nodes in bulk.
+
We recommend you download Shadowrocket. It is third party and costs an additional $3 if you want to purchase it for yourself. If not, we have already purchased it on the US APP STORE with the Apple ID:shz7348@icloud.com and password Qq654321.Pay attention to special symbols and case, login to the store account to download and install, and then open in Safari This (ordinary port) or This (single-port multi-user), then click OK, and you will be able to add servers in bulk.
SSR Subscription address:
- Ordinary port address:{$baseUrl}/link/{$ssr_sub_token}?mu=0
+ Normal port and address:{$baseUrl}/link/{$ssr_sub_token}?mu=0
Single port multiuser port address:{$baseUrl}/link/{$ssr_sub_token}?mu=1
-
download, Install, and then click on the default browser on theThis link (Ordinary port)orThis link (single port multiuser), And then click OK, batch add nodes, and then select the routing around the mainland, the upper right corner can open the Internet. While providing an ACL address,Long press to copy the addressTo the client can be applied.
-
SSR Subscription address:You can add a subscription at the node list to automatically update the node:
+
Download, install, and then open your default browser and click on This link (Ordinary port) or This link (single port multiuser). Afterward, click OK, batch add servers, and then select the server you want, and connect by clicking the paper airplane icon.
+
SSR Subscription address: You can add a server subscription list to automatically update the servers:
Ordinary port address:{$baseUrl}/link/{$ssr_sub_token}?mu=0
Single port multiuser port address:{$baseUrl}/link/{$ssr_sub_token}?mu=1
-
router is brushedthis firmware, Then SSH login router, execute the following command (import ordinary port)
+
Flash your router with this firmware, Then SSH login into your router and execute the following command (import ordinary port)
wget -O- {$baseUrl}/link/{$router_token}?is_ss=0 | bash && echo -e "\n0 */3 * * * wget -O- {$baseUrl}/link/{$router_token}?is_ss=0 | bash\n">> /etc/storage/cron/crontabs/admin && killall crond && crond
Or this single-port multi-user
wget -O- {$baseUrl}/link/{$router_token_without_mu}?is_ss=0 | bash && echo -e "\n0 */3 * * * wget -O- {$baseUrl}/link/{$router_token_without_mu}?is_ss=0 | bash\n">> /etc/storage/cron/crontabs/admin && killall crond && crond
@@ -174,7 +174,7 @@
{if URL::SSCanConnect($user)}
- The address of each node, please go to the node list to see!
+ To get indovidual servers' addresses, please go to the server list!
- port
@@ -186,35 +186,35 @@
- Custom encryption
- {$user->method}
- - Custom confusion
+ - Custom Obfuscation
- {$user->obfs}
{else}
-
Hello, your current encryption method, confusion, or protocol settings can not be connected under the SS client. Please use the SSR client to connect, or to the data editing page to modify and then check here.
-
At the same time, Shadowsocks single-port multi-user connection is not affected by your settings, you can use the corresponding client to connect here ~
+
Your current encryption type, obfuscation type, or protocol will not work with the Shadowsocks client. Please use the ShadowsocksR client to connect, or to the edit details page to change them to compatible types before coming back here.
+
If you are using the Shadowsocks single-port multi-user connection type, then it will not be affected by your settings, and you can use the corresponding client to connect without problem ~
{/if}
-
download, Extract, run the program, and then you have two ways to import all nodes
- (1)DownloadThis (ordinary port) , placed in the directory of small aircraft, and then open the small plane.
- (2)ClickHere (ordinary port), Then right click on the small aircraft - import the URL from the clipboard
+
Download, extract, and run the program. You have two ways to import all nodes:
+ (1)Downloa This (ordinary port) , and place it in the same directory of the app you just downloaded. Open the app.
+ (2)Click Here (ordinary port), then right click on the small paper airplane icon and click on "import the URL from the clipboard".
-
download, Install, and then downloadThis (ordinary port)orThis (single-port multi-user), Run the program, the small aircraft on the right server list submenu "import server configuration file ..." import this file, and then select a suitable server, update the PAC, and then open the system agent to the Internet.
+
Download, Install, and then download This (ordinary port)or This (single-port multi-user). Run the program, then right click on the small paper airplane icon on the right. Select from the server list submenu "import server configuration file ...". Import this file, and then select a suitable server, and update the PAC.
-
Recommended downloadShadowrocket, Has purchased this software for the US store Apple ID:shz7348@icloud.com passwordQq654321.Pay attention to special symbols and case, switch the store account to download and install, and then click in SafariThis (ordinary port)orThis (single-port multi-user), And then click OK, you can add nodes in bulk.
-
iOS downloadThis (ordinary port)orThis (single-port multi-user), Into the Surge, and then you can freely switch the server online.
+
We recommend you download Shadowrocket. It is a third party app that costs an additional $3. If you don't want to purchase it for yourself, we have purchased this software from the US store. You can login using this Apple ID:shz7348@icloud.com and password Qq654321. Pay attention to special symbols and case, login to download and install, and then open this page in Safari and open This (ordinary port)or This (single-port multi-user), And then click OK, you can add nodes in bulk.
+
iOS download This (ordinary port)or This (single-port multi-user). Paste it into the app, and all the servers will be automatically added.
-
download,anddownload, Then install, and then click on the phoneThis link (normal port)orThis link (single port multi-user port)Copy to the clipboard, open the Shadowsocks client, select from the clipboard import, and then select a node, set the route to bypass the mainland, click on the plane can access the Internet.
+
Download the basic version or the one with obfuscation. Install, and then click on this link (normal port) or This link (single port multi-user port)Copy to the clipboard, then open the Shadowsocks client, select from "import from clipboard" from the top menu to import all the servers. Finally, select a server and click on the paper airplane icon to connect.
-
The router is brushedThis firmware, Then SSH login router, execute the following command (import ordinary port)
+
Flash the router with This firmware, Then SSH login router, execute the following command (import ordinary port)
wget -O- {$baseUrl}/link/{$router_token}?is_ss=1 | bash && echo -e "\n0 */3 * * * wget -O- {$baseUrl}/link/{$router_token}?is_ss=1 | bash\n">> /etc/storage/cron/crontabs/admin && killall crond && crond
Or this single-port multi-user
wget -O- {$baseUrl}/link/{$router_token_without_mu}?is_ss=1 | bash && echo -e "\n0 */3 * * * wget -O- {$baseUrl}/link/{$router_token_without_mu}?is_ss=1 | bash\n">> /etc/storage/cron/crontabs/admin && killall crond && crond
- After the implementation of the router can be set up the panel to choose Shadowsocks server to connect.
+ After the router has been installed, you can choose a Shadowsocks server to connect.