* Check import presence across all imports and not just the first one
Also, simplify imported data toggle rendering to not explicitly
refer to the earliest import source.
* Change imported stats toggle icon in dashboard
* Test `Imported.get_imports_date_range/1`
* Simplify failed UA/GA import email copy
* Add validation for the events metric in main_graph
* Test the already existing events metric support in main-graph
* Put total conversions on the graph
* extract main_graph_csv function (refactor only)
* add total_conversions and conversion_rate to goal-filtered visitors.csv
* update changelog
* add conversion rate to Stats API timeseries
* make sure CR can be queried as the only metric
* add a test asserting zeros are returned
* add tests for filtering by other properties at the same time
* Remove unnecessary validation of params
1. It doesn't make to validate `interval` (and its granularity) in all
endpoints. It's only relevant for the main graph.
2. The plug (renamed to `date_validation_plug`) already makes sure that
the dates are validated. No need to call the same function again in
Top Stats and Funnel endpoints.
* add metric validation to main graph
* Add tests for main graph API
* put conversion rate on the graph
* update changelog
* Add revenue metrics into metrics.ex
* make fn private
* avoid setting graph metric to visitors in goal-filtered view
* UX improvement: don't autofocus on Custom properties on dashboard
Currently when you visit the dashboard with a certain configuration,
it will automatically scroll to the bottom, which is annoying.
To reproduce:
1. localStorage.clear() in console
2. Refresh, open properties at the very bottom
3. Refresh again
Expected behavior:
1. Dashboard shows
Actual behavior:
1. Dashboard scrolls to the bottom
* Changelog entry
Follow-up to https://github.com/plausible/analytics/pull/3719
The previous behavior was predicated on:
- Allowing a single custom property filter
- Allowing breaking down only by the chosen custom property filter
Now these restrictions are removed the previous auto-switching just becomes annoying
* Revert "Unify percentage change for CR and bounce_rate (#3781)"
This reverts commit a6b1a6ebc7.
* Revert "Bring Stats API up to speed: Add `conversion_rate` to Aggregate and Breakdown (#3739)"
This reverts commit 672d682e95.
* disable event metric with include_imported in every case
* add missing test for metric validation
* refactor metric validation functions
* implement conversion_rate metric validation
* move calculate_cr function into Stats.Util
* Refactor: Move aggregate CR logic into Stats.aggregate
* define atoms to exist
* Ensure that CR does not depend on visitors being queried
If 'visitors' are already queried, we'll use that value. Otherwise we'll
need to make another query to fetch it.
* confirm Stats API aggregate supports CR (tests only)
* small refactor
This is the only 'event_property' left after pattern matching on all
others in the function clauses defined above.
* Make it possible to optionally query conversion_rate
...in breakdown queries (excluding goal and custom prop breakdown)
* A little refactor asking for revenue metrics
1. The `@revenue_metrics` module attribute is an empty list on full build
anyway
2. We don't need to query for revenue metrics if there are no revenue goals
returned in the given query (even if revenue goals exist in site.goals)
3. Revenue metrics are already dropped in prop breakdown without a goal
filter via (get_revenue_tracking_currency/3)
* Make it possible to optionally query conversion_rate (continuation)
... also from a custom prop and goal breakdown
* Frontend adjustments to the Locations report
* Display conversion rate in Regions and Cities (ListReport view)
* Display total conversions, conversions (visitors), and CR in the
"Details" modals of Countries, Regions, and Cities
* Move the percentage into a separate column in the Countries details table
* confirm Stats API breakdown supports conversion_rate (tests only)
* small refactor: extract maybe_add_time_on_page function
* Make it possible to query cr alone
... (without the visitors metric). Already supported in aggregate, this
commit only implements it for the breakdown API.
* Reuse Stats.Util helper functions from b02db88 for aggregate API
We can follow the same logic as with breakdown for manually adding
`visitors` into the metrics list and taking it out of the response
later on.
That way we don't have to make another query, e.g. in a case where
only pageviews and conversion rate is queried. Also keeps things
consistent.
* changelog update
* fix test after resolving merge conflict
* Use explicit string->atom mapping instead of casting
* alias Util module instead of importing it
* use Enum.empty instead of Enum.any
* improve readability
* rename special_metrics to computed_metrics and explain with a comment
* rename visitors_without_event_filters to total_visitors
* keep a single function for removing unwanted metrics
---------
Co-authored-by: Adrian Gruntkowski <adrian.gruntkowski@gmail.com>
* Support using matches/contains for most filters
* Change behavior where we auto-zoom to specific browser/os/source to only do so if filtering on a single value
* No contains filtering on `location`
* Update CHANGELOG.md
* Fix merge conflict
* WIP: PropFilterRow
* Get multi-behavior working
* Render multiple prop filters in one
* Modal reads from query string correctly
* Backend support for multiple custom property filters
* Add backend tests for multiple custom property filters
* Disable already selected options in property keys
We can't allow choosing the same property multiple times without changing the request
params, which we decided against
* Allow choosing any property under Behaviors > Custom props even if custom prop filter applied
This was a limitation (I believe) introduced by using ARRAY JOINs to query custom properties
* CHANGELOG.md
* Solve credo warning about too deep nesting
* Update assets/js/dashboard/stats/modals/prop-filter-modal.js
Co-authored-by: RobertJoonas <56999674+RobertJoonas@users.noreply.github.com>
* Refactor internal function for clarity
* Add another step -> Add another
* Solve 500 error
* Separate boxes per property filter
* Retain other filters in props table
* removeFilter behavior for props
* matches_member support for custom props
* filter_suggestions for prop keys should account for prop filter
* find over filter
* refactor appliedFilters
* FILTER_TYPES => FILTER_OPERATIONS
* Make add another link not wrap the whole page
* Unique keys
---------
Co-authored-by: RobertJoonas <56999674+RobertJoonas@users.noreply.github.com>
* Allow `matches` operator to work in BE for custom props
Note: No FE support yet, needs further testing
* feat: allow choosing `contains` for property filters in the UI
* no autocomplete on prop values if `contains` for consistency
* CHANGELOG.md
* Fix: Handle (none) property in property breakdowns when using matching
When matching we should always exclude (none)
* Revert "Remove unused RocketIcon"
This reverts commit c5e8d0c172.
* Revert "Display either hash or actual error message"
This reverts commit 0c091ab35f.
* Revert "Use ApiErrorNotice in funnels"
This reverts commit 5929de248e.
* Revert "Don't render "No data yet" when there's a NetworkError for example"
This reverts commit 70bee07632.
* Revert "Show the sinking shuttle notice whenever an API error occurs"
This reverts commit 9a62c8af2b.
* Revert "Add Hahash dependency"
This reverts commit b94207ea0a.
* Remove support hash
* Add Hahash dependency
* Don't leak internal server error details to the user
* Show the sinking shuttle notice whenever an API error occurs
* Don't render "No data yet" when there's a NetworkError for example
* Use ApiErrorNotice in funnels
* Display either hash or actual error message
The reason "internal-server-error" doesn't work well as a fallback
hash is that e.g. `NetworkError when attempting to fetch resource`
might be completely at client's fault. In such cases it's better
to display the whole thing still.
* Remove unused RocketIcon
* Display premium features tabs on the dashboard
This commit makes the funnels and props tab on the dashboard visible
even when the site owner's plan does not have access to that feature.
This is to raise awareness of those features, and if the site owner does
not want to see that tab, they can still click "Hide this report" to
hide it.
Previously, when the plan did not support a feature, the feature module
`enabled/1` function returned `false`, regardless of the
`sites.feature_enabled` toggle. This commit creates a new function
called `opted_out/1` to differentiate access from explicitly opting out
a feature.
* Remove unused data-conversions-enabled attribute
* DRY Plausible.Billing.Feature.check_availability/1 function
* Allow opting out features the user doesn't have access to
* add upgrade CTA to FeatureSetupNotice
* fix JS linting errors
* simplify notice.js
* fix behaviour when deleting funnels saved to localstorage
In case some other funnel exists, we will use that as the default
selected one. If not, a feature setup notice will be displayed again.
---------
Co-authored-by: RobertJoonas <56999674+RobertJoonas@users.noreply.github.com>
Co-authored-by: Robert Joonas <robertjoonas16@gmail.com>
This commit replaces the `mousedown` event for `click` to close a modal,
such as the detail dialog. This allows the scrollbar to be clicked
without firing an event, and right clicks too.
Closes#2872
* Update applications
* Clone community config
* Move modules to experimental dir
* Update runtime config
* Apply first set of compile-time conditionals
* Move funnel schemas to experimental
* Make funnel schema-less build compile
* Use experimental/lib for elixir code
* Move JS funnels to experimental
* Clean up conditional rendering
* Tidy up the pipeline
* Make two builds pass tests without warnings
* Reuse existing dotenvs
* Do a bunch of renames
* Clean up naming
* Run secondary CI
* Update router
* Remove RewriteFunnelDupes migration
Tests were disabled already and it was a one-off shot
* Fixup quota mixins
* Add moduledoc
* Change MIX_ENV for seconary test run
* Skip crm on small
* !fixup
* Exclude flags pipeline
* Update lib/plausible_web/controllers/stats_controller.ex
Co-authored-by: Adrian Gruntkowski <adrian.gruntkowski@gmail.com>
---------
Co-authored-by: Adrian Gruntkowski <adrian.gruntkowski@gmail.com>
* Update Tailwind to latest v3.3.3
* Upgrade autoprefixer and postcss
* Move tailwindcss plugins to devDependencies
* Remove unused tailwind rules
* Remove obsolete 'transform' rules
Ref: https://tailwindcss.com/docs/upgrade-guide#automatic-transforms-and-filters
* Use the current yellow, update gray to slate
* Move webpack to devdependencies
* Go more minimal with package.json changes
* Update autoprefixer version
* Update postcss version
* Adjust dark style colors
* Use proper node version is asdf config
* automatic CONVERSIONS -> PROPS navigation
In the Behaviours section, we'll navigate from Goal Conversions > Properties,
when a goal filter is applied by clicking on an entry in the Goal Conversions
list. This navigation does not happen for pageview goals or special goals (e.g.
'Outbound Link: Click', 'File Download', etc.)
The Behaviours component will remember that the navigation happened in order
to return the user to the previous view when the goal filter is removed.
* ability to store prop_keys per goal in localStorage
* pass the onclick handler to the Details view too
This makes sure that when a listItem is clicked in the Details view,
the same behaviour (such as changing the Locations tab from 'Countries'
to 'Regions') is called.
* bugfix - always escape pipes when applying goal/prop filters
* disable propkey selection when prop filter applied
* make the propkey selector take up all the width
* Update interval dropdown based on custom range selection
* Add `monthsBetweenDates` function
* Reassign interval for custom "period" based on local storage
* Generate intervals by period based on stats_start_date
* Account for "custom" and "all" period intervals dynamically
* rename Properties to Custom Properties in Site Settings
* fix docs link for custom props
* add back the external links for special goal URLs and 404 paths
* grandfathering note
* Remove `Plausible.Sites.set_allowed_event_props/2` function
This commit removes the `Plausible.Sites.set_allowed_event_props/2`
function in favor of `Plausible.Props.allow/2`.
* Allow internal prop keys in queries
This commit allows internal prop keys by default in queries. I decided
not to include internal keys in the database, because they might change
and we'd need to migrate it again.
* remove redundant 'props.' from behaviours/index.js
---------
Co-authored-by: Robert Joonas <robertjoonas16@gmail.com>
This commit removes the allowed props list from the data attribute
passed to React. The list was used for checking whether props configured
or not. This commit adds a new `hasProps` attribute, and removes the
list.
* fix conversions fetchData limit to the right number
* make Goal Conversions metric column width match Properties
* add more top-margin to Details links in ListReport
* add special handling for url prop in Conversions
* change 'Details' button to 'More' when no additional details
* fix CI
* breakdown by 'path' prop instead for 404 pages
* change the 'MORE' button back to 'DETAILS'
But keep the option of not showing the button when there are less
than 9 list entries.
* capture special props in an object instead (review suggestion)
* Add cloaked link to special goals list
---------
Co-authored-by: Vinicius Brasil <vini@hey.com>
* rename conversions.js to deprecated-conversions.js
* add a new Conversions component and switch by props FF
* add a Details view to the new Conversions component
* allow querying conversions with pagination
...and keep the current behaviour for DeprecatedConversions, always returning
page=1 and limit=100
* hide some columns on mobile
* prevent ListReport first column header overflow
* extract add_exit_rate function
* Change internal API metric names for /entry-pages & /exit-pages
* `unique_entrances` -> `visitors`,
* `total_entrances` -> `visits`,
* `unique_exits` -> `visitors`,
* `total_exits` -> `visits`,
This is just a consistency improvement - the `visitors` metric always means
one thing and there's no need to call it different for entry pages internally.
This commit does not change any noticable behavior. The UI labels are kept
the same and the column headers in the CSV export will also remain the same.
* Change internal API metric names for /conversions
* `unique_conversions` -> `visitors`,
* `total_conversions` -> `events`,
* return revenue metrics from /custom-prop-values (backend)
* be more explicit about which metric is plotted with Bar
* validate that ListReport input metrics actually exist in the API response
* display revenue metrics in the dashboard Properties section
* limit the number of columns shown on mobile
* add revenue metrics to Properties > Details
* review suggestions
* define hiddenOnMobile per metric instead of keeping the first 3
* rewrite if-else block
---------
Co-authored-by: Vini Brasil <vini@hey.com>
* extract add_exit_rate function
* Change internal API metric names for /entry-pages & /exit-pages
* `unique_entrances` -> `visitors`,
* `total_entrances` -> `visits`,
* `unique_exits` -> `visitors`,
* `total_exits` -> `visits`,
This is just a consistency improvement - the `visitors` metric always means
one thing and there's no need to call it different for entry pages internally.
This commit does not change any noticable behavior. The UI labels are kept
the same and the column headers in the CSV export will also remain the same.
* Change internal API metric names for /conversions
* `unique_conversions` -> `visitors`,
* `total_conversions` -> `events`,
* make (none) value in custom prop breakdown add +1 to pagination limit
This is needed because the (none) value is always added to the
breakdown_results **after** fetching those from ClickHouse.
* only include (none) values on the first page of results
* fix percentage metric calculation for paginated results
Instead of summing up the number of visitors from the breakdown results
to get the total, we have to make a separate query to `Stats.aggregate`.
Otherwise, the percentages for each results page will wrongly add up to 100%.
Since imported data for aggregated visitors and other properties (such as
browsers, OSs, etc) live in different tables, we have to tweak the tests to
also include the same number of visitors in the `imported_visitors` table.
* add details view for props
* changelog
* exclude imported data from total
* add the props section in behaviors
* update listReport when keyLabel (=propKey) changes
* make column min-width configurable and increase for props
* add rendering condition to limit container height
* fix filter link
* fix tests
* disable clear for single-option combobox
* improve single-option combobox styling
* fix fetchPropKeyOptions fn update on query change
* BUGFIX: searching for prop_values in property filter modal
* change the order of funnels and props section pickers
* change props section Bar color from gray to light-red
* remove disabled options from combobox dropdown (multi & single)
* display percentage metric values without a % sign
* change metric labels in goal filter view to Visitors and Events
* fix realtime update timer
* refactor SourceList to use ListReport
* refactor SourceList into a fn comp
* change referrer-drilldown API response format and remove dead code
* use ListReport in referrer-list
* fix CI
* fix flaky test
* remove IO.inspect
* Move money cast function to Stats.Util
* Add revenue metrics to main graph API
* Plot revenue metrics on the main graph
* Return plain numbers instead of a map
* Fix Credo issues
* Fix canMetricBeGraphed function
* Revert canMetricBeGraphed function changes